Why do we choose visual positioning laser marking machine? At present, the production will have the following problems:

1. The pieces are very small, and the fixtures are manually used for positioning, which is difficult to place, slow and takes a long time;

2. There are many types of products, and many sets of fixtures are required to match, and the cost is high;

3. Manual placement requires and manual confirmation of the marking position, low efficiency and high labor cost;

4. Manual marking, there is a phenomenon that the placement is not always in same place, resulting in a high waste rate;

5. One person can only operate one machine, mass production, and the efficiency is very low;

6. There may be mistakes in manual operation, resulting in missed typing or wrong content, etc., resulting in customer complaints.

In view of the various problems encountered in the above industrial production, Vmade visual positioning laser marking machine has its obvious advantages:

1. Need not fixtures, and it can be placed flatly at will to accurately locate;
2. Add product templates in minutes, no need to worry about the variety of products, and it is convenient to adjust the machine;
3. The marking products can be placed at will, saving customers the cost of positioning the mold and the cost of positioning time;
4. The intelligent visual positioning system automatically batch processing, and the production capacity is increased by 3 to 10 times;
5. The vision software algorithm automatically calculates the operating conditions at high speed, without human operation errors;
6. A single person can operate multiple devices at the same time, greatly improving the efficiency;
7. It can be matched with mechanical platforms such as assembly line, X/Y platform, and multi-station to realize automatic laser marking;

Advantage of CCD camera:

CCD visual positioning automatic laser marking machine can achieve accurate marking as long as the product is within the processing range of laser marking scanning galvanometer; that is to say, the processing position is OK even if the position of each time is different. This technology uses the principle of visual positioning. Firstly, the product template is made and saved as a standard template. During the processing, the product is photographed, compared, and positioned by the computer. After the adjustment, the product can be accurately processed. The shape of the processed products can be circular, square, and irregular, which can be identified. This process is particularly suitable for small products, which can avoid the processing of positioning material tray and fixed fixtures, greatly saving the processing cycle of laser marking.

If you want to get one similar CCD Visual Positioning System marking machine or need more information about the laser machine,please feel free to contact us.